Sunray is a direct replacement of PhotoVoltaic (PV) cable, the interconnecting cable used between solar panels in a solar farm. Sunray is the most energy-efficient and cost-efficient photovoltaic (PV) wire on the market. These premium CCA conductors offer 3% greater efficiency than standard cables.
Read MoreDesigned to reduce wildlife and incidental contact, Copperweld® Stingray™ wire is an easy-to-install, covered, CCS high-voltage cable for use between phase conductors and equipment bushings.
Read MoreArcAngel is an IEEE-compliant CCS grounding conductor for substation grounding applications where electrical performance is critical, and flexibility is needed while still offering all the benefits of Century products.
Read MoreCentury Grid is Copperweld’s flagship family of grounding conductors and structural cables, installed in the harshest environments for over 100 years. With twice the strength of copper, Century is used in applications where high tensile strength, corrosion resistance, and theft deterrence are required.
Read MoreACCC® (Aluminum Conductor Composite Core) cable is an advanced overhead power line conductor that offers enhanced efficiency, capacity, and reliability for electrical transmission. It replaces traditional Aluminum Conductor Steel Reinforced (ACSR) cables and other high-capacity conductor systems.
Read MoreAn ACSR/TW (Aluminum Conductor Steel Reinforced/Trapezoidal Wire) cable is an advanced type of overhead power line conductor specifically designed to carry high-voltage electricity over long distances efficiently and reliably. This cable is a variant of the standard ACSR (Aluminum Conductor Steel Reinforced) cable but features aluminum strands in a trapezoidal shape rather than the typical circular shape.
Read MoreAACSR (Aluminum Alloy Conductor Steel Reinforced) cable is a type of overhead conductor used primarily in power transmission and distribution lines. It is designed to deliver high tensile strength along with good conductivity, making it suitable for long-distance power transmission under high mechanical stress conditions.
Read MoreAn All Aluminum Conductor (AAC) cable is a type of electrical conductor commonly used in overhead power lines for both primary and secondary distribution. It is made entirely of aluminum, which is known for its high electrical conductivity, light weight, and relatively low cost.
Read MoreAn All Aluminum Alloy Conductor (AAAC) cable is a type of overhead conductor used in power transmission and distribution lines. Similar to the All Aluminum Conductor (AAC), the AAAC uses aluminum in its construction, but with a significant difference: AAAC cables are made from aluminum alloy rather than pure aluminum. This alloy typically includes elements such as magnesium and silicon, which enhance the overall properties of the conductor.
Read MoreDynamic Ratings will be hosting their Annual User Group Meeting on October 9-10, 2024, in Charlotte, NC at the Hilton Charlotte Airport. The Annual User Group Meetings foster a sense of community and support among users while providing direct benefits to both the users and the organizations that host them. These meetings are the perfect forum for existing and future customers.
Read MoreThe COYOTE Dome Closure by Preformed Line Products (PLP) is an adaptable and reliable solution for managing fiber optic cables. It is designed to be craft-friendly, offering features that simplify installation and re-entry without requiring special tools. The dome comes in different sizes, including 6.5" x 17", 6.5" x 22", and 9.5" x 28", making it suitable for various applications.
Read MoreThe IEEE PES conference, organized by the Power & Energy Society (PES) of the Institute of Electrical and Electronics Engineers (IEEE), is a leading event in the power and energy industry. It serves as a platform for professionals, researchers, academics, and industry leaders to exchange knowledge, present research findings, discuss emerging trends, and explore innovative solutions in the field of power and energy engineering. The conference typically features technical sessions, tutorials, panel discussions, keynote speeches, poster presentations, and networking opportunities, covering a wide range of topics including power systems, renewable energy, smart grids, electric vehicles, energy storage, and more.
Read MorePublic Safety Canada has implemented a new measure aimed at combating child labour and forced labour in Canadian supply chains. This measure is expected to affect most of the manufacturers represented by Composite Power Group in Canada.
The companies are expected to comply with the new requirements by May 31st, 2024. Canadian customers are likely to include compliance-related requirements in their project bid packages.
Therefore, we want to ensure that each manufacturer represented by Composite Power Group is well-positioned long before the deadline.
Read MoreDISTRIBUTECH International® is the leading annual transmission and distribution event that addresses technologies used to move electricity from the power plant through the transmission and distribution systems to the meter and inside the home or business. Composite Power Group will be attending the conference, so look for these familiar faces on the floor, or near our manufacturers’ booths!
Read MoreWe are thrilled to announce that we will be participating as exhibitors at the highly anticipated SYNC Conference & Exhibition. Make sure to visit us at booths 14 and 10, where we will proudly present our exceptional product offering and have on-site specialists from companies such as Dynamic Ratings! Come explore our innovative solutions, learn more about our services, and discover how we can meet your needs.
Read MoreWe are excited to be participating once again as one of the major exhibitors at the highly anticipated EDIST Conference & Exhibition. Make sure to visit us at booths 1-3 and 11-13, where we will present our exceptional product offering along with our partners. Come explore our innovative solutions, learn more about our services, and discover how we can meet your needs.
Read MoreWe are delighted to announce that Composite Power Group has achieved the highly coveted recognition of being certified as a Great Place to Work.
This certification is a result of the dedication and hard work of not only our management team but every member of our remarkable family here at Composite Power Group. We want to extend our heartfelt thanks to our employees for their candid feedback and engagement, which played a pivotal role in earning this esteemed recognition.
Read MoreShould a transformer’s cooling system fail unexpectedly, you might find yourself looking for a quick-swap, temporary solution to bring your transformer back online and restore power to your customers.
Trantech Radiator Products’ latest addition to cooling solutions is the Mobile Auxiliary Cooler (MAC). Offering a range from 40 to 215kW of cooling capacity per unit with 3-stage capability (ONAN, ONAF and OFAF).
Read MoreOctober 2, 2023, marks the official launch of the DILO Direct Service Center in Montreal! Learn more about DILO Direct, our Canada team, and services now available to all Canadian Provinces and Territories.
Read MoreComposite Power Group Inc. is an electrical equipment manufacturers’ representative firm that provides technical, hands-on, local sales representation for industry leading companies that supply products and services to the electric power industry.
We have regional offices in Ontario, Eastern and Western Canada. Please call the number that corresponds to your location to get the best service!
Ontario - (519) 942-8485
Eastern Canada - (514) 726-6596
Western Canada - (403) 613 1127
Mailing Address
Composite Power Group
265 Bridge St Fergus, ON N1M 1T7 Canada
